Table of Contents
Advertisement
3550-US-5.0
POLLING
Setting Up Polled Waiting with Super Quick-Scan
Before pressing Start, press Super Q.Scan so you can store your polled waiting document in the
memory. If you use Super Q.Scan to place the Polled Waiting documents into the memory, they
will not be erased automatically after they are polled. To erase them you must use the Cancel Job
function. (See page 6-11.)
Sequential Polling
This function is the reverse of Broadcasting, in which your machine sends a document to several
destinations. In a sequential polling operation, your machine will request documents from
several fax units in a single operation. After all the polling operations are finished, a Sequential
Polling Report will be printed automatically.
KEYS TO PRESS
1 . Make sure there are no documents
in the feeder.
2 . Press Function.
3 . Press 1.
4 . Press 2.
5 . Press Z (left arrow) or X (right
arrow) to select Polling ON.
6 . Press Set.
7 . Press Stop.
8 . Specify the destination fax
machines that you wish to poll by
entering the One-Touch key(s) and/
or Speed-Dial numbers, one after
the other, or pressing only a Group
number.
Example: Group key.
9 . Press Start. Your machine will poll
each number or group member in
turn for a document.
9 - 4
THE DISPLAY WILL SHOW:
0 9 / 1 2 / 1 9 9 6
1 5 : 2 5
1 . T E M P . S E T T I N G S
1 . T E M P . S E T T I N G S
2 . P O L L I N G
P O L L I N G : O F F
SELECT
{
}
&
P O L L I N G : O N
2 . P O L L I N G
ENTER
FAX
NO.
PRESS
START
KEY
A L L
B R O T H E R
D I A L I N G
SET
Advertisement
Table of Contents
Troubleshooting
