Shure Digital IntelliMix SCM820 Manual page 55

typical
Internal Processing
32-bit
Latency
From channel input to mix output, Estimated Nominal, ±0.1 ms
Analog to Analog
Analog to Dante
Dante to Analog
Dante to Dante
Gain Adjustment Range
Low Cut
High Shelf
Gain Adjustment Range
Low Shelf
High Shelf
6-Band PEQ
Limiter
Digital Feedback Reducer (DFR) Processing
Number of DFR Blocks
Number of Notch Filters
Notch Filter Bandwidth
Notch Filter Depth
Networking
Network Interface
SCM820
SCM820-DAN
Cable Requirements
Cat 5e or higher, shielded, 100 m maximum
Network Addressing Capability
DHCP, link-local, static
Single Device ( ms)
0.51
0.29
0.28 + TN
0.06 + TN
−110 dB to +18 dB
Corner: 25 Hz to 320 HzSlope: 12dB/octave
Corner: 5 kHzSlope: 12dB/octaveGain: −18 dB to +18 dB
−110 dB to +18 dB
Corner: 25 Hz to 20 kHzSlope: 12dB/octaveGain: −18 dB to +18 dB
Corner: 25 Hz to 20 kHzSlope: 12dB/octaveGain: −18 dB to +18 dB
25 Hz to 20 kHz, ±18 dBBandwidth: 1/70 to 4octaves
Ratio: 10:1Threshold: −50dBFS to −2dBFSAttack: 0.1 msDecay: 100 ms
2
1 to 16 (default)
High Q: 1/70th octave (Q=101)Low Q: 1/40th octave (Q=58)
0 db to −18 dB in 0.5 dB increments
Single Port, 10/100 Mbps Ethernet
Dual Port, Gigabit Ethernet, Dante digital audio
Shure Incorporated
In a Link Group ( ms)
0.76 + 4TN
0.54 + 4TN
0.53 + 5TN
0.31 + 5TN
55/59