Accessing network settings
Use MXW application to
specify network type
Use Dante Controller to
change
Installation
Power
Connect the unit to AC power using the supplied IEC cable. Turn on the power switch.
Rackmounting
Rackmount the mixer using the screws and washers supplied in the Hardware Kit. Follow these general best practices when
rackmounting equipment:
•
Ambient temperature of the rack should not exceed specified operating temperature range of the device.
•
Keep fan inlet and side air vents clear from obstructions and provide adequate space for airflow within the rack.
•
When possible, provide 1 RU of empty space between each device.
Network type
•
Static
•
DHCP
•
Network mode
•
Dante network control
•
Audio settings
Shure Incorporated
17/59