Input Tab - Shure Digital IntelliMix SCM820 Manual

Input Tab

Channel Name
Source
Input Gain Level
Low-Cut Filter
Channel names can be customized with up to 31 any characters in length except '=','.' or '@'.
Sets the audio input to one of two sources:
• Analog (default): Audio is from a microphone or line-level audio source connected to a
channel input on the mixer back panel.
• Network: Audio is from the Dante digital audio network. Dante Controller software is re-
quired to properly route audio to the channel inputs.
Selects the analog input gain level for each channel.
• Mic (+46 dB): For less sensitive microphones such as dynamics.
• Mic (+26 dB): For loud talkers or sensitive microphones such as condensers.
• Line (+0dB): For line-level sources such as mixer inserts.
Note: Gain is disabled when the audio source is set to Network.
Ideal for attenuating low-frequency vibration caused by table vibrations or air-conditioning
rumble. Adjust the frequency of the 12 dB/octave filter from 25 - 320 Hz.
• Green= enabled
• Gray= disabled
Shure Incorporated
41/59