Intellimix Tab - Shure Digital IntelliMix SCM820 Manual

Intellimix Tab

Mixer Settings
Mixer Type
Mix Modes
The SCM820 can be set to operate as a single or dual mixer:
• Single: Channels are routed to a single mix bus that sends the same audio to both Mix
A and B outputs. This allows the same program to be sent to different rooms or record-
ing applications. The output gain, parametric equalizer and limiter can be set separately
for each mix.
• Dual: Two separate buses provide independent automixes for each mix output. This al-
lows two entirely different mixes to result from the same set of inputs or enables the
SCM820 to function as two smaller independent mixers. This is useful when the mixer is
being used for two applications. For example, set Mix A to Classic mode for sound rein-
forcement, and set Mix B to Smooth for a broadcast feed. As a dual mixer, each channel
can route to Mix A, Mix B, both or neither mixes.
The Mix Mode sets the IntelliMix configuration to determine the way the channels are mixed
to the master outputs. When an adjustment is made to any IntelliMix preset, the mode auto-
matically changes to Custom. See Mixer Modes section for configuration details of each pre-
set.
Press the mode button to highlight which channels are routed to that mix. A colored bar in
the channel strip correlates to the assigned mix output. To view the other mix's settings, click
on the mode for that mix.
Note: When set to Single Mixer operation, Mixes A and B are the same.
Shure Incorporated
43/59