Mute Control
◦
Pre-IntelliMix
◦
Post-IntelliMix
Direct Output Selection
◦
Pre-EQ
◦
Post-EQ
◦
Post-Fader
◦
IntelliMix
◦
IntelliMix NOMA
Operating the Mixer
Front Panel Modes
Channel Inputs
The channel knobs operate in five modes for different types of input signal adjustment and display. Use the front panel mode
selection button to select from the following modes.
Channel Gain (gain)
Low Cut (low cut)
High Shelf (hi shelf)
Input Signal Meter (ch. me
ter)
IntelliMix Gain Meter (gain
and ch. meter)
Adjust gain within a 128 dB range while displaying the gain setting on the LED ring. Unity
gain is at the 9th LED.
Adjust the frequency of the low cut filter (6 dB/octave from 25 to 320 Hz). Use to remove
low-frequency noise such as table vibrations or air-conditioning rumble.
Adjust the high shelf boost or cut (± 12 dB at 5 kHz). Use to add presence to muddy vocals,
temper sibilant vocals, or enhance the sound of off-axis lavalier microphones.
LEDs display the input signal level in real-time. Channel gain is adjustable in this mode, and
will momentarily display channel gain setting during adjustments.
LEDs display the IntelliMix attenuation applied in realtime. Channel gain is adjustable in this
mode, displaying the setting on the LEDs during adjustments.
Shure Incorporated
12/59