Preferences Tab - Shure Digital IntelliMix SCM820 Manual

DFR Enable/Disable Button
Lim (Limiter) Indicator
Clip Indicator
Output Meter
Fader and Gain Value Box
Limiter Activation Box
Lim Threshold
Output Level
Mute
Link Mode

Preferences Tab

Warranty Information Read-Only
When DFR is assigned from the DFR tab, an enable/disable button appears in that channel
strip. Select to toggle the state:
• Green= enabled
• Gray= disabled
Illuminates to indicate that the signal has exceed the limiter threshold, engaging the limiter.
Illuminates when the signal has clipped the outputs, holding for two seconds.
Displays the output signal level.
Adjusts the mix volume from -110 dB to +18 dB.
Activates the limiter when selected.
Set the limiter threshold from -2 to -50 dBFS for the mix outputs. The level is indicated by the
blue triangle next to the meter.
Selects the output level of the mix outputs. Set according to the input of the connecting
equipment. There are three settings: Line (-0dB) (default), Aux (-20dB), Mic (-46dB).
Mutes the audio output for that mix.
Defines the audio content for the mix outputs when the device is in a Link Group.
• Global (default): The mixer's outputs contain audio from the entire Link Group.
• Local: The mixer's outputs contains only the audio from that mixer's inputs.
Shure Incorporated
47/59