Repair - Siemens SINAMICS G120 Hardware Installation Manual

Operation, repair, and maintenance

6.2 Repair

6.2 Repair
Fire or electric shock due to defective components
If an overcurrent protection device is triggered, the converter may be defective. A defective
converter can cause a fire or electric shock.
• Have the converter and the overcurrent protection device checked by a specialist.
Repair
Fire or electric shock due to improper repair
Improper repair of the converter may cause malfunctions or result in consequential damage
such as fire or electric shock.
• Only commission the following persons to repair the converter:
• Only use original spare parts when carrying out repairs.
Recycling and disposal
For environmentally-friendly recycling and disposal of your old device, please contact a
company certified for the disposal of waste electrical and electronic equipment, and dispose of
the old device as prescribed in the respective country of use.
48
WARNING
WARNING
– Siemens customer service
– A repair center that has been authorized by Siemens
– Specialist personnel who are thoroughly acquainted with all the warnings and operating
procedures contained in this manual.
Hardware Installation Manual, 04/2021, A5E36265179B-AB
PM250 Power Module