5.1
Permissible networks
Note
Line requirement
The machine manufacturer must ensure that in operation the voltage drop between the
transformer input terminals and the inverter when operated with its rated values is less than 1%.
The inverter is designed for the following power distribution systems according to IEC 60364-1
(2005).
Restrictions for installation altitudes above 2000 m
Above an installation altitude of 2000 m, the permissible line supplies are restricted.
PM250 Power Module
Hardware Installation Manual, 04/2021, A5E36265179B-AB
Restrictions for special ambient conditions (Page 61)
Connection
5.1 Permissible networks
33