Type Of Original; Making Multiple Copies; Sorting Multiple Copies - Brother FAX 2600 Operation Manual

Type of Original

You can select the Copy resolution for your type of original. The default setting
is AUTO, which is used for originals that contain both text and photographs.
TEXT is used for originals containing only text. PHOTO is used for copying
photographs.
1
Place the original face down in the ADF.
2
Press Photo/Text.
3
Press or
and press Copy.
4
Using the dial pad, enter the number of copies.
5
Wait five seconds—OR—Press Copy again.

Making Multiple Copies

There are two ways to make multiple copies on your FAX/MFC. You can
choose whether the copies will be STACKED (all copies of page 1, then all
copies of page 2, etc.), or SORTED (collated). The default resolution for
multiple copies is AUTO.

Sorting Multiple Copies

1
Place original face down in the ADF.
2
Press Copy.
3
Use the dial pad to enter the number of copies you want (up to 99).
4
Wait five seconds—OR—Press Copy.
5
Press or
6
Press Copy.
If you select SORTor STACK after pressing Copy and get a MEMORY
FULL message while you are scanning the first page, press Stop to cancel the
job and restart it to make a single copy. If you selected SORT and the memory
full message appears while scanning subsequent pages, you can press Copy to
copy the portion that is in memory, or press Stop to cancel. To restart the copy
job using less memory, press Copy for stacked copies.
10 - 2
M A K I N G C O P I E S
to choose the type of original
to select STACK or SORT.
DOC TYPE:AUTO?
SELECT & SET