Pause; Hold; Tone/Pulse; Redial - Brother FAX 2600 Operation Manual

Pause

Press Redial/Pause to insert a 3.5 second pause between numbers. If you are
dialing overseas, you can press Redial/Pause as many times as needed to
increase the length of the pause.

Hold

1
Press Hold to put a call on Hold.
2
You can replace the handset without disconnecting the call.
3
Pick up the FAX/MFC handset to release the call from Hold. Picking up an
extension handset will not release the call from Hold.

Tone/Pulse

If you have pulse dialing service, but need to send tone signals (for telephone
banking, for example), follow the directions below. If you have touch tone
service, you do not need this feature to send tone signals.
1
Lift the handset.
2
Press #. Digits dialed after this send tone signals.
3
When you hang up, the fax machine returns to pulse dialing service.

Redial

If the last number you dialed was busy, press Redial/Pause for easy re-dialing.
7 - 7
A U T O D I A L N U M B E R S A N D D I A L I N G O P T I O N S