Storing Speed Dial Numbers; Changing One Touch And Speed Dial Numbers - Brother FAX 2600 Operation Manual

If you need to store a longer pause than 3.5 seconds, press Redial/Pause two
Note
or more times.

Storing Speed Dial Numbers

You can store Speed Dial numbers, so you can dial by pressing only four keys. There
are 30 Speed Dial locations. (See
, page 9-1 . )
Activity
1
For the FAX, press Function, 6, 2.
For the MFC, press Function, 1, 6, 2.
2
Use the dial pad to enter a two-digit
location (01–30) and press Set.
3
Enter the number (up to 20 digits)
and press Set.
4
Use the dial pad to enter the name or company (up to 15 characters) and press
Set. You can use the chart on page 4-2 to help you enter letters—OR—Press
Set to store the number without a name. (See
5
to select the type of number and press Set.
Press or
FAX A fax number
TEL A telephone (voice) number
FAX/TEL Both a fax and telephone number
6
Return to Step 2 to store another Speed Dial number—OR—Press Stop to exit.

Changing One Touch and Speed Dial Numbers

If you try to store a One Touch or Speed Dial number in a location where a number
is already stored, the LCD displays the current name stored there, then prompts you
to either
1. CHANGE—OR—2. EXIT.
1
Press 1 to change the number stored, or press 2 to exit without making a change.
2
Enter a new number.
If you want to erase the number, press Stop when the cursor is to the left of the
digits. The letters above and to the right of the cursor will be deleted.
If you want to change a digit, use
you want to change, then type over it.
3
Follow the directions from Step 3 in Storing One Touch Numbers or Step 4 in
Storing Speed Dial Numbers.
A U T O D I A L N U M B E R S A N D D I A L I N G O P T I O N S
, page 7-5 and
Speed Dialing
SPEED-DIAL? #
ENTER & SET
#05:
ENTER & SET
NAME:
Entering Text
or to position the cursor under the digit
Fax Settings and
, page 4-2.)
7 - 2