Brother FAX 2600 Operation Manual page 90

ERROR MESSAGE
COVER OPEN
DISCONNECTED
DOCUMENT JAM
DOWNLOAD FULL
(May occur when the
MFC is used as a
printer.)
(For MFC 4600 Only)
MACHINE ERROR
XX
MEMORY FULL
(May occur when the
MFC is used as a
printer.)
NO RESPONSE/
BUSY
11 - 3
T R O U B L E S H O O T I N G A N D R O U T I N E M A I N T E N A N C E
CAUSE
The top cover was not
completely closed.
The other party or other
party's FAX/MFC
terminated the call.
Documents were not
inserted or fed properly or
document was too long.
The download buffer is
full.
The FAX/MFC has a
mechanical problem.
Machine memory
capacity has been
exceeded.
The number you called
does not answer or is
busy. Or, you may have
reached a number that is
not connected to a fax
machine.
ACTION
Open, then close each
cover.
Try to fax or receive
again or call the other
party to see what
happened.
Do not pull paper out
until you see page 11-6.
Unplug the MFC and
plug it back in. Data
remaining in the memory
of the MFC will be
deleted.
Turn off the power. Then
call Brother Customer
Service:
USA: 1-800-284-4329
From within Canada:
1-800-853-6660
From within Montreal:
1-514-685-6464
Unplug the MFC and plug
it back in. Data remaining
in the memory of the MFC
will be deleted.
• If you have installed the
®
Windows driver, try
again after setting the
True Type mode to
"Print as Graphics" in
the PRINT menu of
your application
software.
• Reduce the print
resolution or reduce the
complexity of your
document.
Check the number and
try again.