Brother FAX 2600 Operation Manual page 99

DIFFICULTY
I cannot print from my
application software.
(For MFC 4600 only)
Sometimes I get the
error message PRINT
OVERRUN when
printing certain
documents from
®
Windows .
(For MFC 4600 only)
The FAX/MFC does not
load paper. The LCD
shows CHECK PAPER
or PRINTER JAM.
The FAX/MFC does not
load paper from the
manual feed slot.
How can I load
envelopes?
(For MFC 4600 only)
What paper can I use?
(For MFC 4600 only)
How can I clear paper
jams?
T R O U B L E S H O O T I N G A N D R O U T I N E M A I N T E N A N C E
SUGGESTIONS
®
Windows Setup Printing Difficulties
Make sure the Windows
and you select it in your application software.
If you are using the supplied Windows
turn the error recover operation on in the Setup
dialog box and try again. Reduce the print
resolution or reduce the complexity of your
document and try again. Expand the printer
memory by installing one of the optional memory
boards.
Paper Handling Difficulties
Check to see if the CHECK PAPER or PRINTER
JAM message appears on the LCD. If so, the multi-
purpose sheet feeder may be out of paper or not
properly installed. If it is empty, load a new stack
of paper into the feeder and then press Start. If
there is paper in the multi-purpose sheet feeder,
make sure it is straight. If the paper is curled, you
should straighten it. Sometimes it is helpful to
remove the paper, turn the stack over and put it
back into the multi-purpose sheet feeder. Reduce
the amount of paper in the multi-purpose sheet
feeder, then try again.
Reinsert the paper firmly, one sheet at a time.
You can load envelopes from either the multi-
purpose sheet feeder or the manual feed slot. Your
application software must be set up to print the
envelope size you are using. This is usually done in
the Page Setup or Document Setup menu of your
software. Refer to your application manual.
You can use plain paper, envelopes,
transparencies, labels and organizer paper. For
information on paper you can use, see
on page 2-7.
Paper
See
Printer Jam
®
printer driver is installed
on page 11-6 to 11-7.
®
driver,
Acceptable
11 - 12