Cisco Catalyst 9400 System Management Configuration Manual page 212

Flow Record 4 - Directional Flow Record - Egress
Step 9
Step 10
Step 11
Step 12
Step 13
Step 14
Step 15
Step 16
Step 17
System Management Configuration Guide, Cisco IOS XE Bengaluru 17.4.x (Catalyst 9400 Switches)
194
Command or Action
Device(config-flow-record)# match
transport source-port
match transport destination-port
Example:
Device(config-flow-record)# match
transport destination-port
match interface output
Example:
Device(config-flow-record)# match
interface output
match application name
Example:
Device(config-flow-record)# match
application name
collect interface input
Example:
Device(config-flow-record)# collect
interface input
collect counter bytes long
Example:
Device(config-flow-record)# collect
counter bytes long
collect counter packets long
Example:
Device(config-flow-record)# collect
counter packets long
collect timestamp absolute first
Example:
Device(config-flow-record)# collect
timestamp absolute first
collect timestamp absolute last
Example:
Device(config-flow-record)# collect
timestamp absolute last
end
Example:
Device(config)# end
Configuring Application Visibility and Control in a Wired Network
Purpose
Specifies a match to the transport destination
port as a key field.
Specifies a match to the output interface as a
key field.
Specifies a match to the application name.
Note This action is mandatory for AVC
support, as this allows the flow to
be matched against the application.
Specifies to collect the input interface from the
flows.
Specifies to collect the number of bytes in a
flow.
Specifies to collect the number of packets in
a flow.
Specifies to collect the time, in milliseconds,
when the first packet was seen in the flow.
Specifies to collect the time, in milliseconds,
when the most recent packet was seen in the
flow.
Returns to privileged EXEC mode.
Alternatively, you can also press Ctrl-Z to exit
global configuration mode.