Cisco Catalyst 9400 System Management Configuration Manual page 192

System Messages
Recommended Action: No action is required. If you want to know which policy is applied (the policy in-use)
and its reporting requirements, enter the show license all command in privileged EXEC mode.
----------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------
Error Message %SMART_LIC-6-AUTHORIZATION_INSTALL_SUCCESS: A new licensing
authorization code was successfully installed on: [chars].
This message is not applicable to Cisco Catalyst Access, Core, and Aggregation Switches, because there are
no enforced or export-controlled licenses on these product instances.
----------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------
Error Message %SMART_LIC-6-AUTHORIZATION_REMOVED: A licensing authorization code has
been removed from [chars]
Explanation: [chars] is the UDI where the authorization code was installed. The authorization code has been
removed. This removes the licenses from the product instance and may cause a change in the behavior of
smart licensing and the features using licenses.
Recommended Action: No action is required. If you want to see the current state of the license, enter the
show license all command in privileged EXEC mode.
----------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------
Error Message %SMART_LIC-6-REPORTING_REQUIRED: A Usage report acknowledgement
will be required in [dec] days.
Explanation: This is an alert which means that RUM reporting to Cisco is required. [dec] is the amount of
time (in days) left to meet this reporting requirements.
Recommended Action: Ensure that RUM reports are sent within the requested time.
• If the product instance is directly connected to CSSM, or to CSLU and the product instance is configured
to initiate communication complete this step on the product instance, the product instance will
automatically send usage information at the scheduled time.
If it is not sent at the scheduled time, because of technical difficulties, you can license smart sync
command in privileged EXEC mode. For syntax details, see the license smart (privileged EXEC) in the
Command Reference.
• If the product instance is connected to CSLU and CSLU is configured to initiate communication, complete:
Collecting Usage Reports: CSLU Initiated, on page
• If the product instance is connected to CSLU, but CSLU is disconnected from CSSM, complete these
tasks:
Downloading an ACK, on page
• If the product instance is disconnected from CSSM and you are not using CSLU either, enter the license
smart save usage command in privileged EXEC mode, to save the required usage information in a file.
Then, from a workstation where you have connectivity to CSSM, complete these tasks:
Data to CSSM and Downloading an ACK, on page 159
page
System Management Configuration Guide, Cisco IOS XE Bengaluru 17.4.x (Catalyst 9400 Switches)
174
Download All For Cisco (CSLU Interface), on page
159, and
160.
141.
142, Uploading Usage Data to CSSM and
Upload From Cisco (CSLU Interface), on page
> Installing a File on the Product Instance, on
Smart Licensing Using Policy
143.
Uploading Usage