Cisco Catalyst 9400 System Management Configuration Manual page 182

Configuring a License
for example, if you do not want to use an add-on license any more, configure the no form of the command in
this task.
Information about available licenses can be found Smart Account or Virtual Account. The available licenses
may be one of the following:
Base licenses
• Network Essentials
• Network Advantage (includes Network Essentials)
Add-on licenses—These can be subscribed for a fixed term of three, five, or seven years.
• DNA Essentials
• DNA Advantage (includes DNA Essentials)
To configure or change the license in-use, complete the following steps:
Before you begin
Supported topologies: all
Procedure
Step 1
Step 2
Step 3
Step 4
Step 5
System Management Configuration Guide, Cisco IOS XE Bengaluru 17.4.x (Catalyst 9400 Switches)
164
Command or Action
enable
Example:
Device> enable
configure terminal
Example:
Device# configure terminal
license boot level license_level
Example:
Device(config)# license boot level
network-advantage
add-on dna-advantage
exit
Example:
Device(config)# exit
copy running-config startup-config
Example:
Device# copy running-config
startup-config
Smart Licensing Using Policy
Purpose
Enables privileged EXEC mode.
Enter your password, if prompted.
Enters global configuration mode.
Activates the configured license on the product
instance. In the accompanying example, the
DNA Advantage license will be activated on
the product instance after reload.
Returns to the privileged EXEC mode.
Saves changes in the configuration file.