Table of Contents
Advertisement
GBC 5031TS
SPACE AND POWER REQUIREMENTS FOR THE 5031TS SYSTEM
49"
28"
15"
17.5"
31.5"
Machine
Power Requirements
Feeder
115 VAC 2 Amp
Laminator 220 VAC 30 Amp
Cutter
115 VAC 2.2 Amp
Air Unit
220 VAC 9.6 Amp
Air Unit
S
uggest NEMA 6-15P
Note:
Drops or poles recommended, outlets should be no higher than 24" above floor
NEMA 6-30P
© 2006 General Binding Corporation
120" (10 ft)
52"
Feeder
- - Nema 5-15
- - Nema 6-15
Laminator
139" -
- - Nema 6-30
Cutter
- - Nema 5-15
Stacker
Tray
Wire and Plug
Wired with 69" cord, NEMA 5-15 plug
Wired with 65" cord, NEMA 6-30 plug - Single Phase (see below)
Wired with 69" cord, NEMA 5-15 plug
Does not come with wire, plug, or switch. Suggest mounting switchbox between AC
source and Air Unit. Mount on feeder under feeder on/off switch. 220vac Single Phase.
NEMA 6-15P
OPERATION MANUAL
Recommended work
space: 10' x 17.5'
Feeder swings out for
Film loading and unloading
211" (17.5 ft)
Minus a 2" overlap at feeder and laminator.
Notes:
AC Cord location
28
Advertisement
Table of Contents
