Auto Dry Cool Heat Fan Operation - Daikin FTHF40RVLT Operation Manual

AUTO DRY COOL HEAT
FAN Operation
NOTE
MODE
• Since this air conditioner heats the room by taking heat from outdoor air to indoors, the heating capacity becomes smaller in
lower outdoor temperatures. If the heating effect is insufficient, it is recommended to use another heating appliance in
HEAT combination with the air conditione
• The heat pump system heats the room by circulating hot air around all parts of the room. After the start of HEAT operation,
it takes some time before the room gets warmer.
• This air conditioner cools the room by releasing the heat in the room outside.
COOL
Therefore, the cooling performance of the air conditioner may be decrease if the outdoor temperature is high
• The computer chip
DRY
controls temperature and airflow rate, so manual adjustment of these functions is unavailable.
• In AUTO operation, the system selects an appropriate operation mode (COOL or HEAT) based on the room and outside
AUTO temperatures and starts the operation.
• The system automatically reselects setting at a regular interval to bring the room temperature to user-setting level.
FAN • This mode is valid for fan only.
The air conditioner operates in the user selected operation mode.
■
To start operation
Press button of your desired operation mode.
AUTO operation
Press
COOL operation
Press
DRY operation
Press
HEAT operation
Press
FAN operation
Press
• The OPER ATION lamp lights green.
Display
• Operation mode can be change while operating by press your desired
operation mode button.
■
To stop operation
Press
• The OPERATION lamp goes off.
Notes on each operation mode
r.
works to rid the room of humidity while maintaining the temperature as much as possible. It automatically
button. " " appears on the LCD.
button. " " appears on the LCD.
button. " " appears on the LCD.
button. " " appears on the LCD.
button. " " appears on the LCD.
10