Table of Contents
Advertisement
AUTO · DRY · COOL · HEAT · FAN
Operation
NOTE
Notes on AUTO operation
• In AUTO operation, the system selects an appropriate operation mode (COOL or HEAT) based on the indoor temperature and starts the
operation.
• The system automatically reselects setting at a regular interval to bring the indoor temperature to the user-setting level.
Note on COOL operation
• This air conditioner cools the room by releasing the heat in the room outside.
Therefore, the cooling performance of the air conditioner may be degraded if the outdoor temperature is high.
Note on DRY operation
• Eliminates humidity while maintaining the indoor temperature as much as possible. It automatically controls temperature and airflow rate, so
manual adjustment of these functions is unavailable.
Notes on HEAT operation
• Since this air conditioner heats the room by taking heat from outdoor air to indoors, the heating capacity becomes smaller in lower outdoor
temperatures. If the heating effect is insufficient, it is recommended to use another heating appliance in combination with the air conditioner.
• The heat pump system heats the room by circulating hot air around all parts of the room. After the start of HEAT operation, it takes some time
before the room gets warmer.
• In HEAT operation, frost may occur on the outdoor unit and lower the heating capacity. In that case, the system switches into defrosting
operation to take away the frost.
Note on FAN operation
• This mode is valid for fan only.
The air conditioner operates with the operation mode of your choice.
From the next time on, the air conditioner will operate with the same operation mode.
„ To start
1.
Press
• Each pressing of the button changes the mode setting in sequence.
AUTO
2.
Press
• "
" appears on the LCD.
• The OPERATION lamp lights green.
„ To stop
Press
again.
• "
" disappears from the LCD.
• The OPERATION lamp goes off.
and select an operation mode.
DRY
COOL
HEAT
.
Basic Operation
FAN
Display
12
Advertisement
Table of Contents
