On Timer Operation - Daikin FTHF40RVLT Operation Manual

ON TIMER Operation

NOTE
■
In the following cases, set the timer again.
• After a breaker has turned off.
• After a power failure.
• After replacing batteries in the remote controller.
■
To use ON TIMER operation
1.
Press .
• "
2.
Press until the time setting reaches the
point you prefer.
• Each pressing of button increases the time setting by 1 hour.
• Setting time can be increase to 12 hours maximum.
• The TIMER lamp lights
Display
■
To cancel ON TIMER operation
Press .
• " " disappear from the LCD.
• The TIMER lamp goes off.
■
To combine ON TIMER and OFF TIMER
• A sample setting
- When setting while unit is operating.
(Example)
Turn off unit in the next 1 hr.
Turn on unit in the next 8 hr.
(7 hr. after turn off)
- When setting while unit is stopped.
(Example)
Turn on unit in the next 2 hr.
Turn off unit in the next 5 hr.
(3 hr. after turn on)
" is display on the LCD.
orange.
for combining the 2 timers is shown below.
Combined
Combined
20