Basic Operation; Auto · Cool · Dry · Heat · Fan Only Operation - Daikin FTXV22SAVLT Operation Manual

AUTO · COOL · DRY · HEAT · FAN ONLY
Operation
NOTE
Notes on AUTO operation
• In AUTO operation, the system selects an appropriate operation mode (COOL or HEAT) based on the indoor temperature, then starts the operation.
• The system automatically reselects setting at a regular interval to bring the indoor temperature to user-setting level.
Note on COOL operation
• This air conditioner cools the room by releasing the heat in the room outside.
Therefore, the cooling performance of the air conditioner may be degraded if the outdoor temperature is high.
Note on DRY operation
• Eliminates humidity while maintaining the indoor temperature as much as possible. It automatically controls temperature and airflow rate,
so manual adjustment of these functions is unavailable.
Notes on HEAT operation
• Since this air conditioner heats the room by taking heat from outdoor air to indoors, the heating capacity becomes smaller in lower outdoor
temperatures. If the heating effect is insufficient, it is recommended to use another heating appliance in combination with the air conditioner.
• The heat pump system heats the room by circulating hot air around all parts of the room. After the start of HEAT operation, it takes some time
before the room gets warmer.
• In HEAT operation, frost may occur on the outdoor unit and lower the heating capacity. In that case, the system switches into defrosting
operation to take away the frost.
Note on FAN ONLY operation
• This mode is valid for fan only.
The air conditioner operates with the operation mode of your choice.
„ To start operation
Press the button of your desired operation mode.
AUTO operation
Press . "
COOL operation
Press . "
DRY operation
Press . "
HEAT operation
Press . "
FAN ONLY operation
Press . "
• The OPERATION lamp lights green.
Display
• The operation mode can be changed while the air conditioner is operating by pressing
the button of your desired operation mode.
„ To stop operation
Press .
• The OPERATION lamp goes off.
" appears on the LCD.
" appears on the LCD.
" appears on the LCD.
" appears on the LCD.
" appears on the LCD.

Basic Operation

10