Deleting All Stored Stations; Enhanced Tuning Mode (Etm+): An Introduction - Tecsun PL-330 User Manual

Deleting All Stored Stations

It is possible to delete all stations from the memory (including ETM)
simultaneously.
1) Turn the device off.
2) Press and hold the [
the display.
3) Quick press the [ POWER ] button to confirm and delete all stored stations.
4) Once the display returns to showing the clock time all stored frequencies
have been deleted.
Note: If the [ POWER ] button is not pressed for confirmation within 3 seconds,
the delete function is exited automatically.

ENHANCED TUNING MODE (ETM+): AN INTRODUCTION

ETM+ allows you to auto tune and store FM, LW, MW and SW stations into
the ETM memory. Unlike ATS (Auto Tuning Storage), scanned stations will
not be stored into the regular memory (VM). In this way, when you are in a
different city or country, you can use the ETM+ function to auto search new
stations without overwriting any previously stored stations within the memory.
Unlike its predecessor ETM (Easy Tuning Mode), ETM+ can also be used for
listening to LW, MW and SW stations more conveniently. Because signals in
these frequency bands may only be available during a specific time of day,
you can use this feature to make time-specific ETM memories.
] (DELETE) button untill "dEL" and "ALL" flash on
12
www.tecsunradios.com.au