Deleting Stored Stations; Deleting A Single Station; Deleting Stations During Memory Scan - Tecsun PL-330 User Manual

DELETING STORED STATIONS

Deleting a Single Station

1) Enter the memory (VM) mode and select the station that you wish to delete.
2) Press and hold the [
flash on the display.
3) Quick press the [
Note: If the [
the delete function is exited automatically.

Deleting Stations During Memory Scan

The device can auto scan all stored stations within a frequency band or mode
(SYNC/SSB), staying on each station for about 5 seconds, and giving you the
opportunity to delete any unwanted stored stations.
1) Select a frequency band or mode (SYNC/SSB).
2) Quick press [ VF/VM ] to enter the memory mode.
3) Press and hold the [ VF/VM ] button until "PRESET " flashes in the upper
right corner of the display. The device starts to scan all stored stations
and stays on each station for about 5 seconds before continuing.
4) Upon finding an unwanted station, press the [
confirmation is required and scanning continues immediately.
5) To stop the memory scan, quick press any button.
] (DELETE) button until "
] button to confirm and delete the unwanted station.
] button is not pressed for confirmation within 3 seconds,
] (DELETE) button. No
11
" and "PRESET "
www.tecsunradios.com.au