How To Turn The Distinctive Ringing Function On Or Off - Brother MFC4450 Owner's Manual

Brother multi-function center owner's manual
Hide thumbs Also See for MFC4450:
Table of Contents

Advertisement

MFC 4450/OP-US-5.0
DISTINCTIVE RINGING (WITH AN EXTERNAL TELEPHONE CONNECTED TO THE MFC)
4 . Press Z (left arrow) or X (right arrow)
to find the SET mode.
5 . Press Set.
6 . Press Stop.
NOTE: The display should say D/R SET
MODE. Also, the answer mode
lights will flash. You must now
wait for someone to call the
distinctive ringing fax number.
7 . When the phone rings, listen carefully to
check that the ringing pattern is the one
you want to register. If it is, wait until the
display says PICK UP TO SET. Then pick
up the external handset.
8 . Press Start to set.Check that the display
says REGISTERED.
(If the other number was called, press
Stop to cancel.)
9 . Press Start again to receive the incoming
fax, or if the call is a voice call, talk into
the external handset.
After you complete this one-time setup:
1 . The Distinctive Ringing function automatically will be changed from SET to ON.
Set the answer mode based upon your needs.
2 . Be sure to have a friend call you on both numbers to test that everything is set up
correctly.
3 . If you do not complete this function by pressing Start key to register a number, your
MFC will stay in D/R SET MODE. So, if you decide not to register a number, you
must repeat Steps 1~8 and in Step 6 change the mode to OFF.

How to Turn the Distinctive Ringing Function ON or OFF

The distinctive ringing function is designed to accommodate the distinctive ringing
service (a telephone service that provides you with multiple numbers, each with a
distinctive ring pattern, on one line). You can change the distinctive ringing function
setting to ON or OFF as needed after you have registered the distinctive ringing
number in the function called Setting the Distinctive Ringing Function. To change the
setting, repeat Steps 1~8 above; Step 4 is where you can select either ON or OFF.
RECEIVING FAXES AND OTHER CALLS
D I S T I N C T I V E : S E T
6 . D I S T I N C T I V E
D/R
SET
O N L I N E
PICK
UP
START
TO
STOP
TO
R E G I S T E R E D
T E L E P H O N E / F A X
O N L I N E
MODE
TO
SET
SET
CANCEL
6-22

Advertisement

Table of Contents
loading

This manual is also suitable for:

4450 - mfc b/w laser printer

Table of Contents