Brother MFC4450 Owner's Manual page 20

MFC 4450/OP-US-5.0
HOW TO USE ON-SCREEN PROGRAMMING (OSP) AND HELP KEY
Level one
function
2. SPEED-DIAL
4 . SET AUTO
DIAL
3. SETUP
1. SMOOTHING
2. BEEPER
3. COVERPG
5 . USER
4. ERROR RE-TX
OPTIONS
5. REDUCTION
6. RCD PAPER
7. TONER SAVE
2 - 4
Level two
Explanation of Options
function
If you register names and numbers as
Speed-Dial numbers, you can dial a
number automatically just by pressing
Speed-Dial key and a two-digit number
using the dial pad. (Max. of 36 locations)
This is used for setting up a group number
GROUPS
used for broadcasting.
Smoothing enhances the appearance of
incoming faxes.
If you set SMOOTHING to ON, you will
receive messages with the smoothing
enhancement.
ON/OFF
You can adjust the volume of the beeper
with this function.
OFF/LOW/HIGH
If you set COVERPAGE to ON, you can
send your documents with a Cover Page
generated by your MFC. When the
ON/OFF
COVERPAGE setting is ON, you can
select a Cover Page comment.
ON/OFF
If you set ERROR RE-TRANSMISSION
to ON, the MFC automatically resends
the page once an error occurs.
ON/OFF
You can avoid having your incoming data
separated by printing a reduced copy of
the incoming document. The reduction
methods are AUTO or Fixed ratio:
AUTO/100%/93%/87%/75%
You can select one of 3 sizes of paper. The
MFC automatically will adjust the size of
the incoming fax document or original
document so that it fits the paper size you
have selected.
LETTER/LEGAL/A4
You can extend the life of the toner by
conserving its use.
ON/OFF
Factory
Page
setting
3-7~8
3-9~10
O N 6-4~5
L O W 3-5
O F F 5-20~21
5-25~26
O F F
A U T O 6-7~8
L E T T E R 6-5~6
O F F 6-9~10