Bosch Solution 6+6 Quick Reference Manual page 9

Quick Reference Guide
Solution 6+6
How To Enter Event Memory Recall Mode
1. Enter your
The event memory will be played back in reverse chronological order.
2. Press the button to exit this function, or wait until the function automatically terminates after the
last event has been replayed.
How To Enter Walk Test Mode
1. Enter your
The codepad will beep once every second while the system is in the walk test mode.
Unseal and seal the zones to be tested.
2.
The codepad will sound one long beep while the horn speaker will sound one short beep every time a
zone is sealed or unsealed.
3. Press the button to exit this function once all zones have been tested.
How To Enter Fault Analysis Mode
1. Enter your
One or more zone indicators will illuminate to indicate the type of fault that has occurred.
2. Press the button to exit this function.
How To Set The Date and Time
1. Enter your
2. Enter the day, month, year, hour and minute using the format (DDMMYYHHMM) followed by the
button.
How To Turn Day Alarm On and Off
1. Enter your
Three beeps indicate that day alarm is turned on, two beeps indicate that day alarm is turned off.
How To Reset Latching Outputs
1. Enter your
How To Initiate A Modem Call
1. Enter your
3
followed by and the
4
followed by and the
5
followed by and the
6
followed by and the
7
followed by and the
8
followed by and the
9
followed by and the
Bosch Security Systems Pty Limited
button.
button.
button.
button.
button.
button.
button.
SOL 6+6 QUICK REF GUIDE.DOC
Page 9