Turning On/Off The Machine; First Use - Use After A Long Period Of Inactivity - Saeco Lavazza Omnia 120V Operation And Maintenance

Do not lower the coffee
dispensing
brewing coffee.
7.5

Turning on/off the machine

The machine can be turned on/off by pressing the button
located to the rear of the machine.
7.6 First Use - Use after a Long
Period of Inactivity
Refill the machine. Fill the water tank (see "Filling the
water tank"). Connect the plug of the appliance to the
mains (see section "Connection to the Electric Network").
For a perfect Espresso: rinse the coffee circuit if using the
machine for the first time or after a long period of
inactivity.
On first start-up, dispense at least 0.5 l / 17 oz water
without any capsule. Open and close the capsule loading
tray and press the "Long Coffee" button - with no capsule
inserted - to start brewing. Repeat the procedure until the
specified quantity is reached. Do not leave water inside the
tank for more than 3 days. Do not leave water in the
circuit for more than 3 days or, in case this happens,
dispense water (with no capsules) before brewing coffee.
These simple operations will allow you to always brew
excellent coffee. They have to be performed:
• at first start-up;
• when the machine remains inactive for a long time (more
than 2 weeks).
spout while
7.6.1 First start-up
Press the power button on the back of the machine to
turn it on. The control panel display shows the wording
"SYSTEM BOOT" and afterwards you will be requested to
press a button.
Once you have pressed a button, the control panel display
shows "Start water circuit priming?". The "Espresso"
button lights up steady.
Press the espresso button and the machine starts priming
the circuit. The following screen is displayed:
It will then carry out the warm-up and rinse cycle as
described in the "Warming-up and rinsing" section.
US English
31