Saeco Lavazza Omnia 120V Operation And Maintenance page 40

US English
MENU ITEM
filter
Descale Before Activating Filter
Activate Filter?
Insert Filter and Fill Water
Tank
Place Container Under the
Hot Water Spout
Filter Activated
Exit
Errors management
Errors list
Reset errors
Exit
Save to USB
40
Description
This function allows you to control the water filter installation and maintenance.
Available options depend on the presence of an already installed filter.
If no water filters are installed:
- OFF:
keeps the water filter status unchanged
- ON:
Allows you to start the water filter activation procedure, going through the "Activate Filter?"
screen
- EXIT:
Returns to "Filter" screen
If a water filter is already active and not exhausted:
lets you deactivate the water filter
If a water filter is already active and not exhausted:
- RESET:
allows you to install a new water filter, going through the "Activate Filter?" screen
If a water filter is already active, the "Descale Before Activating Filter" screen is displayed
This screen is displayed for 3 seconds and then it automatically leads you to the "Filter" page
A confirmation is requested to continue with the water filter activation:
- YES:
the filter activation procedure starts
- No:
Returns to the "Water Filter Control" page
A preliminary instruction is provided when activating the filter:
- OK:
go to the next step
- EXIT:
Returns to the "Water Filter Control" page
A preliminary instruction is provided when activating the filter:
- OK:
filter activation start
- EXIT:
Returns to the "Water Filter Control" page
This screen is displayed until the user selects OK
This option allows the user to go back to the menu top level
This function allows you to control and display the errors occurred on the machine: - Errors list
- Reset errors
Press the OK button on the EXIT option to go back to the top level
This function allows you to view the machine errors: - Error code:
displays the number code relating to the error occurred
- Error index:
displays the numerical position of the error in a circular list of 20 positions ordered by
time (the most recent on top, the oldest below)
- Error text:
text description of the type of error
This function resets the error list
This option allows the user to go back to the menu top level
This function allows you to write the parameters for machine config., the counters and error list on a USB
drive.
- Save configuration
- Save statistics
Press the OK button on the EXIT option to go back to the top level