Saeco Lavazza Omnia 120V Operation And Maintenance page 68

US English
Place a container under the Cappuccinatore spout.
Select "OK" and press the "OK" button. The machine
dispenses a quantity of water sufficient to rinse the milk
circuit. The following screens appear:
68
Remove the container.
If you do not want to perform the rinse cycle, select "NO"
using the arrow key. Press the "OK" button.
After a certain time,
automatically disappears and the machine goes back to the
ready for use mode.
Always remember to store
milk in the fridge when not
used.
This function allows the machine to preserve proper
hygiene and operating conditions. However, this should
not be considered sufficient to clean the milk circuit.
The Cappuccinatore light cleaning cycle can be performed
any time by following the procedure below:
With the machine on, press the "OK" button. Access the
user menu and scroll it until the "Clean Cappuccinatore"
option. Then, press the "OK" button again. To speed up
this procedure, you just
"Down"/"System Clean" button.
Select the "CAPPUCCINATORE LIGHT CLEAN" option
and confirm with the "OK" button.
this rinse request screen
need to press the