Saeco Lavazza Omnia 120V Operation And Maintenance page 50

US English
8.4.4 Password setting
The PASSWORD must be set by the service provider in
order to prevent access by unauthorised personnel who
could change the machine settings and cause malfunctions.
Three passwords can be set to access the three different
machine menus.
To set the PASSWORD, proceed as follows:
Switch to machine programming mode as described in
section "Access to the Technical Menu".
Press the "Down" button until the following menu is
displayed:
Press the "OK" button to enter the submenu of the
selected option. The following screen is displayed:
Press the "Down" or "Up" button to select the menu for
which to set the password. Press the "OK" button to
confirm. The following screen is displayed:
50
Press the "Down" or "Up" button to select the "Set"
option. Press the "OK" button to confirm and access
password programming. The following screen is displayed:
To enter the password:
Press the "Up" or "Down" button to set the desired
number. Press the "OK" button to move to the next
number.
Repeat the steps until the set password has been entered.
Entered the last number the screen below appears:
Press the "Up" or "Down" button to select the "Yes"
option and confirm the password.
In case you want to change an already set password follow
the same procedure. The following screen will be
displayed:
Select "Disable" to cancel the previously set password, or
select "Change" to modify the previously set password.