Roland Aerophone Pro Parameter Manual page 9

Value
Indication (Parameter)
This function lets you disable the performance keys, and shift the pitch up/down a semitone or whole tone.
1 .
2 .
3 .
4 .
Key Function
Off
Sax Key
Semitone Down
Semitone Up
Wholetone Down
Wholetone Up
English, Japanese,
Language
Chinese
Registers the scene you are currently using as a user scene.
1 .
2 .
User Scene Set
3 .
Registers the scene you are currently selecting as a
1 .
2 .
Favorite Set
Returns the system settings to their factory-set state.
Factory Reset
This operation does not erase the user scene / tone.
User Scene Clear Erases all user scenes/tones that are registered.
Version Displays the version of the unit's system program.
Explanation
Select "Key Function" and then press a performance key.
The name of the key you pressed is shown.
Press the [MENU] button to move the cursor to the lower row.
Select a function.
Press the [MENU] button to move the cursor to the upper row.
Disables the keys.
The keys operate as normal performance keys.
The keys shift down a semitone.
The keys shift up a semitone.
The keys shift down a whole tone.
The keys shift up a whole tone.
Specifies the display language.
Select "User Scene Set" and then press the [MENU]
button.
C A
Use the [-][+] ( / ) buttons to specify the user
scene number in which you want to save the
currently selected scene.
Press the [MENU] button.
A screen appears, allowing you to edit the name of
the scene.
Select "Favorrite Set" and then press the [MENU]
button.
Use the [-][+] (C/A) buttons or [SCENE CATEGORY]
knob to specify the favorite scene number in which
you want to save the currently selected scene.
Settings Used on this Instrument
4 .
If you want to edit the name, press the [J] (YES)
button.
C A
[–] [+] ( / ) buttons
= ?
[SCENE] ( / ) buttons
[S1] button
[S2] button
5 .
Press the [MENU] button.
A confirmation message appears.
6 .
To write the scene, press the [+] (
decide not to write, press the [-] (
.
favorite
3 .
Press the [MENU] button.
A confirmation message appears.
4 .
To write the scene, press the [+] (A) button. If you
decide not to write, press the [-] (C) button.
After writing is completed, the scene that you wrote
is shown.
Moves cursor
Changes the character
Insert one character
Delete one character
A
) button. If you
C
) button.
9