Fuse Replacement; Figure 5-1: Removing Fuse Block From Housing; Figure 5-2: Installing Fuses - Teledyne 3000ZA2G Operating Instructions Manual

Maintenance

5.3 Fuse Replacement

1. Place small screwdriver in notch, and pry cover off, as shown
in Figure 5-1.

Figure 5-1: Removing Fuse Block from Housing

2. To change between American and European fuses, remove
the single retaining screw then flip the Fuse Block over 180
degrees. Replace the screw.
3. Replace fuse as shown in Figure 5-2.
4. Reassemble housing as shown in Figure 5-1.
American Fuses
Teledyne Analytical Instruments

Figure 5-2: Installing Fuses

3000ZA2G
European Fuses
54