Startup - Mitsubishi Electric Q Series Reference Manual

7 APPLICATION FUNCTIONS

7.3.3 Startup

7 - 14
(1) Sending of data for one station per link scan (default)
The low-speed cyclic data for a maximum of one station is sent in one link scan
of the normal cyclic transmission.
[Setting method]
1) Click ( ) [Transmit data of one station in 1 scan] to select.
POINT
The fastest link scan time in the low-speed cyclic transmission can be calculated by
the following equation:
LS = LS number of stations + LS
L
= LS (number of stations + 1)
LS : The fastest link scan time in the low-speed cyclic transmission
L
LS : Normal link scan time
(2) Fixed term cycle interval setting
The low-speed cyclic data is sent in the link cycle of the designated time
frequency.
Valid setting frequency: 1 to 65535 s (18 h, 12 min and 15 s)
[Setting method]
1) Click ( ) [Fixed interval cycle setting] to select.
2) Set the time in seconds (the screen shows a value of 600).
MELSEC-Q
7 - 14