Writing The Parameters To The Cpu - Mitsubishi Electric Q Series Reference Manual

Hide thumbs Also See for Q Series:

Table of Contents

5 PARAMETER SETTINGS

5.10 Writing the Parameters to the CPU

To enable the network parameter settings, they must be written to the CPU using the

Write to PLC function of GX Developer.

The PLC parameters are written as well when the network parameters are written.

To write the parameters to a programmable controller of other station than the one that

connects GX Developer via the MELSECNET/H, change the designation of the

connection destination of GX Developer.

For more information on how to use this function, see the GX Developer Operating

(1) Select the Write to PLC function

(2) Select the parameter as a file to be written, and then execute.