2) Reading From/Writing To Word Devices Of Other Stations (Jp/Gp.read, Jp/Gp.sread, Jp/Gp.write, Jp/Gp.swrite) - Mitsubishi Electric Q Series Reference Manual

7 APPLICATION FUNCTIONS
7.4.5 (2) Reading from/writing to word devices of other stations (JP/GP.READ,
JP/GP.SREAD, JP/GP.WRITE, JP/GP.SWRITE)
7 - 50
The following explains the READ/WRITE instruction format and some program
examples.
(a) Instruction format
1) JP/GP.READ and JP/GP.SREAD
[Network No. designation]
Read command
JP.READ
Read command
JP.SREAD
[Network module start I/O No. designation]
Read command
GP.READ
Read command
GP.SREAD
The following formats can be used only when the host is the Universal model QCPU.
[Network No. designation]
Read command
JP.READ
Read command
JP.SREAD
[Network module start I/O No. designation]
Read command
GP.READ
Read command
GP.SREAD
Jn (S1) (S2) (D1)
Jn (S1) (S2) (D1)
Un (S1) (S2) (D1)
Un (S1) (S2) (D1)
Jn (S1) "(S2)" (D1)
Jn
(S1) "(S2)" (D1)
"(S2)"
Un (S1) (D1)
Un "(S2)"
(S1) (D1)
MELSEC-Q
Target station
QCPU QnACPU
: For link dedicated instruction for the safety CPU,
refer to Section 6.3
(D2) JP: Executed at startup
(D2) (D3) JP: Executed at startup
(D2) GP: Executed at startup
(D2) (D3) GP: Executed at startup
(D2) JP: Executed at startup
(D2) (D3) JP: Executed at startup
(D2) GP: Executed at startup
(D2) (D3) GP: Executed at startup
AnUCPU
7 - 50