Nortel CallPilot 1001rp Installation And Configuration Manual page 336

Maintaining the Pentium III SBC card
To upgrade the BIOS
.
1 Insert the bootable BIOS upgrade disk or CD-ROM, and then power on
the server.
Note: You can obtain a BIOS upgrade disk from your Nortel Networks
customer support representative.
2 Allow the Flash process to complete.
3 Configure the BIOS as described in the following procedure.
To configure the Pentium III SBC
.
1 Restart the server, and then press F2 to enter the CMOS Setup when
prompted.
Note: For the following steps, use the arrow keys to navigate menus, and
press Enter to make a selection.
Result: The Setup Utility starts. The screen has two areas:
Options: The Options menu is on the left side of the screen, and is
composed of Basic options, Advanced options, and PCI options.
Summary Information: The current settings appear on the right side of
the screen.
2 Press F9 to accept the default values.
336
CAUTION
Risk of data loss
Perform this procedure only if specifically instructed to do so
by your Nortel Networks representative.
CAUTION
Risk of data loss
Perform this procedure only if specifically instructed to do so
by your Nortel Networks representative.
Standard 1.0
CallPilot