Nortel CallPilot 703t Installation And Configuration Manual page 68

Using Windows NT online diagnostic tools
To run the nbtstat command from Windows NT 4.0
1 Click Start
command prompt window.
Result: The MS-DOS Command Prompt window appears.
2 At the MS-DOS prompt, type nbtstat with the required parameters.
3 Press Enter.
Result: The system runs the nbtstat utility.
4 Type Exit to exit MS-DOS and return to Windows NT 4.0.
The netstat command
The netstat command displays current TCP/IP network connections and
protocol statistics.
Netstat command syntax
The netstat command uses the following syntax:
netstat [-a] [-e] [-n] [-s] [-p proto] [-r] [interval]
Parameter
-a
-e
-n
-s
68
Programs Command Prompt to display the MS-DOS
Description
Displays all connections and listening ports.
Displays Ethernet statistics. This can be combined with the
-s option.
Displays addresses and port numbers in numerical form.
Displays per-protocol statistics.
Standard 1.0
CallPilot