Nortel CallPilot 703t Installation And Configuration Manual page 102

Using CallPilot Manager to monitor hardware
When you click a component, the page refreshes to show the details about
that component. Details are divided into the sections described in the
following table:
Section
General
Maintenance
102
Description
This section shows general technical information about
the selected component. This typically includes the
following details:
the name, class, type, series, or version of a CallPilot
server
various capabilities of a component (for example,
whether a component is removable)
Note: This section does not appear for all components.
This section shows the state of the selected component.
Use this section to start and stop a component before
running a diagnostic test.
This section appears only for components on which you
are allowed to perform maintenance administration.
For more information about working with component
states, see the following sections:
"Viewing component states" on page 105
"Starting and stopping components" on page 108
Standard 1.0
CallPilot