Nortel CallPilot 703t Installation And Configuration Manual page 245

October 2003
11 Press Esc three times to exit from the MegaRAID BIOS Configuration
Utility.
12 Press Ctrl+Alt+Delete to restart the server.
13 Continue with "To rebuild the hard drive in the RAID system pack with
pre-upgrade data" below.
To rebuild the hard drive in the RAID system pack with
pre-upgrade data
1 Start the server into Windows NT.
2 In Windows NT, click Start
The following window appears:
3 Ensure that Full Access is selected, and then click OK.
Result: The MegaRAID Power Console Plus window appears:
Part 5: 703t Server Maintenance and Diagnostics
Maintaining the AMI MegaRAID Elite 1600 RAID system
Programs MegaRAID Client.
245