Nortel CallPilot 703t Installation And Configuration Manual page 187

October 2003
8 Reinstall the fans (if removed) and upper fan holder foam.
For instructions on reinstalling the fans, see "To install a front system
fan" on page 168.
For instructions on replacing the upper fan holder foam, see "To
replace the upper fan holder foam" on page 160.
9 Reinstall the server's side cover.
10 Reconnect the peripheral device and power cables.
11 Power up the server.
12 Rebuild the drive in the RAID system pack.
This copies the data from the operating hard drive to the new hard drive.
For instructions, see Chapter 9, "Maintaining the AMI MegaRAID Elite
1600 RAID system."
Result: Hard drive replacement is complete.
Part 5: 703t Server Maintenance and Diagnostics
Replacing media drives
187