Table of Contents
Advertisement
About this task
Steps
Place the power adapter port module into the slot provided on the palmrest.
Next steps
1. Install the
system
board.
2. Install the
display
assembly.
3. Install the
system
fan.
4. Install the SSD.
5. Install the WLAN.
6. Connect the
battery
cable.
7. Install the
base
cover.
8. Install the
SD
card.
9. Follow the procedure in
Palm-rest and keyboard assembly
Removing the palmrest and keyboard assembly
Prerequisites
1. Follow the procedure in
2. Remove the
SD
card.
3. Remove the
base
cover.
4. Remove the battery.
5. Remove the WLAN.
6. Remove the
memory
7. Remove the
display
assembly.
8. Remove the SSD.
78
Disassembly and reassembly
after working inside your
before working inside your
computer.
computer.
Advertisement
Table of Contents
