Quickly Locating The Point You Wish To Start Playback (Easy Search); Adjusting The Playback Speed (Dpc (The Digital Pitch Control Function)) - Sony PCM-D50 Operating Instructions Manual

Playing back an MP3 file
You can play an MP3 file on the recorder by
copying it from your PC or other device onto
the recorder. For details, see page 38.
Quickly locating the point you
wish to start playback (Easy
Search)
When "EASY SEARCH" is set to "ON" in the
menu, you can quickly locate the point at
which you wish to start playback by pressing
the  FF/ or  FR/ button repeatedly
during playback or playback pause.
You can go back approximately 3 seconds
by pressing the  FR/ button once, or
advance approximately 10 seconds by
pressing the  FF/ button once. This
function is useful for locating a desired point
in a long recording.
Adjusting the playback speed
(DPC (the Digital Pitch Control
function))
You can adjust the playback speed between
+100% and –75% of normal speed in the
menu. The track is played back in natural
tones thanks to the digital processing
function.
1
While the recorder is stopped, press and
hold the /MENU button until the menu
is displayed.
2
Press the  FF/ and  FR/ buttons
to select "DPC," and press the  PLAY/
ENTER button.
The "DPC" display appears.
3
Press the  FF/ and  FR/ buttons
to set the desired playback speed
between +100% and –75% of normal
speed, and press the  PLAY/ENTER
button to fix the setting. Press the
MENU button to exit the menu mode.
4
Slide the DPC switch to "ON."
The track is played back at the specified
speed. To resume normal playback, slide
the DPC switch to "OFF."
Continued on the next page
/
33