Sony PCM-D50 Operating Instructions Manual page 32

Operations after Recording (continued)
To change the memory drive
The recorder supports the use of "Memory
Stick" in addition to the built-in memory.
You can switch the memory as follows.
When you insert a "Memory Stick," make
sure that the recorder is not recording or
playing a track. Make sure that it is
stopped.
1 While the recorder is stopped, press and
hold the /MENU button until the menu
is displayed.
2
Press the  FF/ and  FR/ buttons
to select "MEMORY," and press the 
PLAY/ENTER button.
The screen used to select the memory is
displayed.
3
Press the  FF/ and  FR/ buttons
to select the desired memory, and press
the  PLAY/ENTER button to fix the
setting.
Operations during playback
To
Operation
Stop playback
Press the
Pause playback
Press the
flashes on the display.
To resume play after pausing,
press the
again.
Fast forward
Press and hold the
(Cue)
button.*
Fast reverse
Press and hold the
(Review)
FR/ button.*
Go back to the
Press the
beginning of the
once.
current track
32
 STOP button.
PAUSE button.

PAUSE button

 FF/

 FR/ button
To
Operation
Go back to
Press the
previous tracks
repeatedly.**
Go to the
Press the
beginning of the
once.**
next track
Go to the
Press the
beginning of
repeatedly.
succeeding
tracks
* If you press and hold the button, the recorder goes
forward or backward slowly at first, and then at
gradually higher speed.
** These operations are for when "EASY SEARCH" is
set to "OFF."
When tracks are played back to the end of
the last track
When you play back or fast play back to the end of

the last track, "TRACK END" lights up for 5
seconds. When "TRACK END" goes off, the
recorder will stop at the beginning of the last track.
If you press and hold the  FR/ button while

"TRACK END" is lit, the tracks are played back
rapidly, and normal playback will start at the point
you release the button.
If the last track is long and you wish to start

playback at a later part of the track, press and hold
the  FF/ button to go to the end of the track
and then press the  FR/ button while "TRACK
END" is lit to go back to the desired point.
For tracks other than the last one, go to the

beginning of the next track and then fast-rewind to
the desired point during playback.
Note
During playback, do not remove the batteries or AC

power adapter. Doing so may cause noise in audio
output from the LINE OUT (OPT) jack and 
(headphone) jack.
FR/ button

 FF/ button
 FF/ button