Locating A Particular Point In A Track - Sony RCD-W100 Operating Instructions Manual

To locate
The next or
succeeding
tracks
The beginning
of the current or
preceding tracks
The next or
succeeding
album
The beginning
of the preceding
album
A specific track
number or track
name directly
Tip
To pause playing at the beginning of a track, turn
AMS while the ALBUM SELECT indicator in the
display is turned off (or press ./> on the
remote) after pausing playback.
Playing directly using the
number buttons Z
You can playback a track directly by using the
number buttons. Press the track number you
want to play. When you select a track number
over 10, press >10 first, then the corresponding
number buttons.
Example:
To enter number 15, press >10, then 1 and 5.
16
Do the following:
During playback, turn AMS
clockwise while the ALBUM
SELECT indicator in the display is
turned off (or press > on the
remote repeatedly) until you find the
track.
During playback, turn AMS
counterclockwise while the
ALBUM SELECT indicator in the
display is turned off (or press .
on the remote repeatedly) until you
find the track.
Turn AMS clockwise while the
ALBUM SELECT indicator in the
display is turned on (or press ALBUM
+ on the remote).
Turn AMS counterclockwise while the
ALBUM SELECT indicator in the
display is turned on (or press ALBUM
– on the remote).
In stop mode, turn AMS while the
ALBUM SELECT indicator in the
display is turned off (or press ./
> on the remote repeatedly) until
you find the track number or track
name, and press H.
Locating a Particular
Point in a Track
You can locate a particular point in a track
during playback or playback pause.
When using the remote, set DECK A/DECK B
to DECK A to operate DECK A, or to DECK B
to operate DECK B.
DECK A/DECK B
m/M
Do the following
To locate a
point
While During playback, press and hold
m or M on the remote until you
monitoring the
sound find the point.
While During pause, press and hold m or
M on the remote until you find the
observing the
display point. You will not hear the sound
during operation.
Tip
"-Over-" appears if the disc reaches the end. Turn
AMS counterclockwise (or press . or m on the
remote).
Note
Tracks that are only a few seconds long may be too
short to scan using the search function. For such
tracks, it is better to play the disc at normal speed.
Z