Audio Path - Tx Audio - Line Output (See Fig. 18) - Panasonic KX-TCD725RUM Service Manual

http://202.224.189.179/view_new/OT/KX-TCD725RUM/SVC/s0601110000.html
6.1.11 AUDIO PATH - TX AUDIO - LINE OUTPUT
(SEE Fig. 18)
TOP PREVIOUS NEXT
Audio from the receiver RXDA enters the BBIC on pin 20 as GAP standard DECT frames. It passes
through the decoding section burst mode controller where it separates out the frame information and
performs de-encryption and de-scramblingas required. It then goes to the DSP where it is turned back
into analogue audio. This is amplified by the analogue front end and emerges at pin 123 - i.e. the RXAF
signal of the line interface.
TOP PREVIOUS NEXT
http://202.224.189.179/view_new/OT/KX-TCD725RUM/SVC/s0601110000.html13.10.2007 10:14:15
Circuit Diagram