Handlebar Removal - Honda XL200 2001 Shop Manual

XL2 0 0
HANDLEBAR
REMOVAL
Remove the wire bands.
Disconnect the front brake switch connectors
Remove the knuckle guard and rearview mirror.
Remove the master cylinder holder and master cylinder.
h
Suspend the master cylinder, with a suitable wire, at least as
hight as originally installed so as to prevent air from getting
into the brake fluid.
Remove the screws and separate the throttle housing.
Disconnect the throttle cables, then remove the throttle pipe.
Remove the screw and right handlebar switch housing.
Remove the knuckle guard and rearview mirror.
Remove the screws and clutch lever bracket.
Remove the screws and left handlebar switch housing.
Remove the bolts, handlebar upper holders and handlebar.
FRONT WHEEL/SUSPENSION/STEERING
WIRE BAND
REARVIEW MIRROR
MASTER CYLINDER
SWITCH HOUSING
HANDLEBAR BOLTS
UPPER HOLDER
1 1 -3