4.
Remove the battery from the computer (2).
To install the battery, reverse the removal procedures.
WLAN module
To remove the WLAN module, use this procedure and illustration.
Table 5-5
WLAN module description and part number
Description
Intel Dual Band Wireless-AC 7265 802.11 AC 2 × 2 Wi-Fi + Bluetooth 4.2 Combo Adapter
IMPORTANT:
authorized for use in the computer by the governmental agency that regulates wireless devices in your
country or region. If you replace the module and then receive a warning message, remove the module to
restore device functionality, and then contact technical support.
Before removing the WLAN module, follow these steps:
1.
Prepare the computer for disassembly
2.
Remove the keyboard/top cover
3.
Remove the battery (see
Remove the WLAN module:
1.
Carefully disconnect the two antenna cables from the module (1).
To prevent an unresponsive system, replace the wireless module only with a wireless module
(Keyboard/top cover on page
Battery on page
(Preparation for disassembly on page
21).
25).
Spare part number
901229-855
21).
Component replacement procedures
27