HP Chromebook 11a Maintenance And Service Manual page 37

1. Prepare the computer for disassembly
2. Remove the keyboard/top cover
3. Disconnect the battery cable from the system board (see
4. Remove the screws from the left hinge, and then rotate the hinge upward (see
on page 33). This step provides access to the tape under the hinge.
Remove the system board:
1. Disconnect the following cables from the system board:
● Two USB cables (ZIF) (1)
● Camera cable (2)
Adhesive strip (3) and display cable (4)
●
Speaker cable (5)
●
2. Remove the six Phillips M2.0 × 4.1 screws (1) that secure the system board to the computer.
3. Remove the system board bracket (2).
4. Lift the left edge of the system board (3) until it rests at an angle.
(Preparation for disassembly on page
(Keyboard/top cover on page
21).
21).
Battery on page 25).
Display assembly
Component replacement procedures 31