1.
Position the keyboard/top cover upside down with the front toward you.
2.
Release the touchpad cable (1) from the adhesive that secures it to the keyboard/top cover.
3.
Disconnect the touchpad cable from the ZIF connector on the touchpad (2).
Reverse this procedure to install the touchpad cable.
Touchpad
To remove the touchpad, use this procedure and illustration.
NOTE:
The touchpad spare part kit does not include the touchpad cable. The touchpad cable is included in
the Cable Kit, spare part number L14906-001, and includes double-sided adhesive.
Table 5-3
Touchpad description and part number
Description
Touchpad
Before removing the touchpad, follow these steps:
1.
Prepare the computer for disassembly
2.
Remove the keyboard/top cover
Remove the touchpad:
1.
Position the keyboard/top cover upside down with the front toward you.
2.
Release the shielding material (1) that covers the top edge of the touchpad.
3.
Remove the three Phillips M2.0 × 2.7 screws (2) that secure the touchpad and touchpad bracket to the
keyboard/top cover.
24
Chapter 5 Removal and replacement procedures for authorized service provider parts
(Preparation for disassembly on page
(Keyboard/top cover on page
Spare part number
M03968-001
21).
21).